Tar xjvf linux-tbs-drivers.tar.bz2 cd linux-tbs-drivers. For the X8664 version, we need to do./v4l/tbs-x8664.sh. This kicks off the configuration for the installation. Then we need to build and install the drivers (This might take a while): make make install. Now we need to install a few tools and testing packages. Open-source drivers. These instructions are inspired from Luis Alves' wiki and TBS' wiki on Github. Go to the later for latest official word on build procedure. You may want to consult the TBS' forum too, for additional advices in case of trouble. This is an experimental build system for media drivers. All files on this tree are covered by GPLv2, as stated at COPYING file. Usage: Just call the build utility: $./build Then, install the drivers as root, with: # make install In order to test, unload old drivers with: # make rmmod Then modprobe the driver you want to test. TBS proprietary DVB drivers + firmware. I read the installation instructions for dvb-c cards again and I didn't find anything special which has to be done for creation/packaging. Check your kernel version: uname -a. Link the build folder.Go to this folder such as: cd /lib/modules/3.10.0-327.13.1.el7.x8664/ ln -sf /usr/src/kernels/3.10.0-327.
How To install TBS DVB-S2 PCIe Cards (for example TBS6909) under Linux with GIT
Supported Cards:
Sureshotgps driver download for windows 10. DVB-S/S2 Cards PCI-E
TBS6922
TBS6922SE
TBS6902
TBS6980
TBS6981
TBS6982
TBS6983
TBS6984
TBS6985
TBS6904
TBS6905
TBS6908
TBS6909
TBS6991SE
TBS6910
USB
TBS5920
TBS5922
TBS5922SE
TBS5925
TBS5980
TBS5990
PCI
TBS8922
DVB-T/T2/C Cards PCI-E
TBS6220
TBS6221
TBS6280
TBS6281
TBS6281SE
TBS6284
TBS6285
TBS6290SE
TBS6205
USB
TBS5220
TBS5880
TBS5881
TBS5280
TBS5281
ATSC CardsPCI-E
TBS6704
Multi-Standard Cards PCI-E
TBS6522
TBS6528
TBS659 Cobra speedzone xtreme driver review.
For the other cards will keep update.
you can get the code here :
https://github.com/tbsdtv/linux_media
How to install :
Download Tbsdtv Driver Printer
mkdir tbsdriver
cd tbsdriver
git clone https://github.com/tbsdtv/media_build.git
git clone –depth=1 https://github.com/tbsdtv/linux_media.git -b latest ./media
cd media_build
make dir DIR=./media
make distclean
make -j4
make install
reboot
after reboot you can check
dmesg | grep frontend
Firmware:
wget http://www.tbsdtv.com/download/document/linux/tbs-tuner-firmwares_v1.0.tar.bz2
tar jxvf tbs-tuner-firmwares_v1.0.tar.bz2 -C /lib/firmware/
Download videology driver software. Download Keyscan Videology USB CAM Interface 1.0 (Other Drivers & Tools). Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Upgrading sources and re-installing：
~ $ cd media
~/media $ git remote update
~/media $ git pull
~/media $ cd ./media_build
~/media_build $ git remote update
~/media_build $ git pull
~/media_build $ make
~/media_build $ sudo make install
(now you can reboot or unload/reload modules manually:)
~/media_build $ reboot
FAQ:
1./bin/sh: 1: lsdiff: not found
sudo apt-get install patchutils
2.you may need to install the Proc::ProcessTable module
sudo apt-get install libproc-processtable-perl
3.fatal error: drx39xyj/drx39xxj.h: No such file or directory
mkdir -p v4l/drx39xyj
cp v4l/drx39xxj.h v4l/drx39xyj/
Download Tbsdtv Driver Download
4. error: ‘USB_SPEED_SUPER_PLUS’ undeclared (first use in this function)
If you are using kernel 3.x you can update to kernel 4.x or you can manul change this file :
case USB_SPEED_SUPER_PLUS:
return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
——>
#if defined USB_SPEED_SUPER_PLUS
case USB_SPEED_SUPER_PLUS:
return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
#endif